Oil Tanks Accessories

The Slow Speed Mixer is the Perfect Solution for continuous mixing. Its also great for candle makers for blending in your fragrances, essential oils and colors. If you need something for special applications just ask.

Description:

Our Slow Speed Mixer is gentle yet thorough. The Double Blade System does not mix air into your product which makes it excellent for blending.
Geared to have incredible torque and power. Thick slurries are no problem. Please note: Some of the oil, wax, M&P must be liquid so the blades can turn freely and don't jam.
The Slow Speed Mixer is just the thing to keep your thick creme moving so that it stays blended. Its also a great hands free way to keep your candle wax, fragrances, essential oils and colors blended while dispensing into your molds.
The Impeller Blades are food grade polypropylene: 3" (7.62") wide, angled at 30 degrees.
The Shaft is milled 6" (15cm) in length at the center point allowing blade adjustment, up or down.
The lid is hinged at one side (not shown). So you can simply lift the lid to add more ingredients or just to look in. The other side of the lid, slips over the motor channel mount. Its easily and quickly removed for full access.
All parts including the motor channel, mount are constructed with Food Grade Materials.
All fittings and shaft are Stainless Steel.
All parts are rated to 230 F (210C). The whole assembly is very light, this makes it very easy to lift out of your tank.
There is Zero maintenance.
If you have questions about which Mixer suits your needs, feel free to contact us. We're here to help.

Specifications:

Normally operates on 120 volt. For International customers we can install a 220 volt motor at no extra cost. Just let us know.
Motor is moisture resistant and fully enclosed.
The heavy duty motor is designed for continuous duty.
The 8' (2.4m) cord is oil and chemical resistant.
Can be shipped UPS.
Special motor speeds are available up to 250 rpm. Call for Pricing.

Model #	Description	Price
OHM1-13	Single Blade Slow Speed Mixer for 13 gallon Tank	$1,034.00
OHM1-20	Single Blade Slow Speed Mixer for 20 Gallon Tank	$1,158.00
OHM2-45	Double Blade Slow Speed Mixer for 45 Gallon Tank	$1,291.40
OHM2-60	Double Blade Slow Speed Mixer for 60 Gallon Tank	$1,394.10
OHM2-85	Double Blade Slow Speed Mixer for 85 Gallon Tank	$1,654.10
OHM2-125	Double Blade Slow Speed Mixer for 125 Gallon Tank	$1,889.10

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Cut your energy usage drastically! Cover your oil melting tank with an insulation jacket. And…it saves you time. Your tank will heat faster and stay heated longer.

Description:

Your Oil Melting Tank Jacket is made with a tough, high R-value, extremely efficient material. It has a heat resistant foam core, heavy foil lining inside and out and its highly reflective. An easy yet effective way to conserve both heat and energy that can save you $$$.

Your Jacket kit is pre-cut with a top, bottom and side panel. It only takes about ten minutes to have your jacket fitted, taped and ready to go.

Your kit includes instructions along with plenty of heavy duty, reflective foil tape. The only thing you will need is a box cutter or sharp knife. Water, oils and heat will not affect its insulation value.

Specifications:

Made of ¼” (7mm), High R value, Foam Core, Double Sided, Foil Faced insulation.

Heavy duty foil tape included.

Can ship UPS.

Model #	Description	Price
6MHJ	6 gallon Oil-Wax Melter Tank Jacket	$31.00
13MHJ	13 gallon Oil-Wax Melter Tank Jacket	$33.00
20MHJ	20 gallon Oil-Wax Melter Tank Jacket	$40.00
45MHJ	45 gallon Oil-Wax Melter Tank Jacket	$47.00
60MHJ	60 gallon Oil-Wax Melter Tank Jacket	$60.00
85MHJ	85 gallon Oil-Wax Melter Tank Jacket	$67.00
125MHJ	125 gallon Oil-Wax Melter Tank Jacket	$99.75

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Never have your oils or waxes set up in your Ball Valve again with our HANDcraft™ Ball Valve Band Heater .

45W 120V band heater comes complete with Velcro strips that fit perfectly around 3/4" or 1" Metal Ball Valves.

Note:

Not for use with Plastic Ball Valves

Model #	Description	Price
BVHEAT	HANDcraft™ Ball Valve Band Heater	$205.00

This is perfect for companies requiring constant heat from tank to jar or mold. Never have your oils or waxes set up in your Ball Valve again.

Assembly is simple to remove and replace with our standard 3 way Ball Valve for different operations.
Works with all of our Oil Melting Tanks.
Comes pre-assembled and is ready to install on your Oil Melting Tank (Oil/Wax Melter).
Just plug in the HANDcraft™ Ball Valve Heater and you're ready to pour.
Includes 1 ½” Stainless Steel Reducer Bell Coupling w/ ¾” Brass Ball Valve and 90 degree brass elbow, HANDcraft™ Ball Valve Heater, and Foam Insulation for the Stainless Steel Bell Coupling.

Model #	Description	Price
BVHeatAssem	HANDcraft™ Heated Valve Assembly	$268.50

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This reducer is great for filling your bottles, jars, candle molds, M&P molds, etc. right from your Oil Melting Tank.

Description:

For those businesses still growing and not quite ready for our Easy Fill Bottler, this is a great way to start filling your containers, bottles, jars or even soap and candle molds.
This will save considerable time on filling your jars, bottles, soap and candle molds.
This is much more efficient method and much less mess than pouring your product into a smaller container to then fill your bottles or molds.
Fits right into our 1 1/2" (38mm) Ball Valve. This allows you to turn the 1 1/2" valve fully on and then just adjust the fluid flow or cut the flow on and off using the smaller 1/2" (13mm) Ball Valve.

Specifications:

Reduction from 1 1/2" (38mm) Ball Valve to a 3/8" (10mm) flow.
Fully assembled, no pipe cement or Teflon tape needed to attach to 1 1/2" (38mm) Ball Valve.
Will handle temps up to 220 F (104 C).
Will handle most acids and alkalis.

Instructions for using Ball Valve Reducer:

Make sure the reducer valve is closed 1st before installing.
Thread the reducer into the ball valve, hand tight, so it is easy to remove.
Plastic to plastic makes a good seal without Teflon tape and does not need to be extremely tight.
Open the big ball valve and then start dispensing using the small ball valve on the reducer.
When you are done, close the big valve and unscrew the reducer.
Simple to clean - Just open the small valve and run a dowel rod or twist up a piece of rag and run through it to clean most of the oil, wax, cream, etc. Then wash and you are ready for your next batch.

Model #	Description	Price
15BVred	Reducer for 1.5 inch Ball Valve	$53.43

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

3/4" Brass Ball Valve

Model #	Description	Price
34BV	HANDcraft™ Brass Ball Valve 3/4"	$18.50

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This handy Faucet replaces the water jacket drain plug on your oil melter tank. It allows you to empty the water jacket by just turning the handle.

You can connect a standard garden hose to the Faucet.

This is ideal when you want to use the water jacket for your tank to cool down the contents in your tank.

All Brass Faucet, fits ½” drain outlet.
Allows connection to tubing or a garden hose.
Replaces the Drain Plug which allows faster emptying of the water jacket.

Specifications

½” Brass Hose Bib Fitting with a ¾” threaded garden hose connection

Model #	Description	Price
OHdrain	Faucet for Water Jacket Drain (Faucet Only)	$14.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Three way, polypropylene ball valve. Perfect for soap makers as its impervious to sodium or potassium hydroxide. Liquids can flow either horizontally or vertically. Comes set up for 90 degree, downward dispensing.

Note: For those not familiar with the term Ball Valve, this is a valve faucet for controlling the flow of liquid. Just a quick 1/4 turn and all flow of your liquid can be shut off. This particular valve allows liquid to quickly flow from a horizontal path to a vertical path for dispensing into vessels, into individual bottles, jars, soap or candle molds. We can supply reduction fittings for small cavity molds as an option. Just contact us if you have any questions.

Model #	Description	Price
15BV	1.5 " Ball Valve for our Oil / Wax Tank	$62.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This is the perfect scale for your large 125 gallon (1000 lb) oil melting tank. Increase your efficiency. You no longer need to weigh a bucket dump it in, weigh again and so forth.

Just zero the scale and start pumping in your raw materials. Its so much easier on your back too.

Description:

Four stainless load cells are embedded in a welded frame. This provides for extreme durability, maximum shock and abuse resistance.
Heavy duty steel construction.
Easy to Operate.
Easy to read; Digital LCD display has large 1" (2.54cm) high graphics and a 60” cord.
Tough molded display enclosure complete with rubber gasket for water and oil resistance.
Display has removable, protective cover.
Large non-skid diamond plate platform surface.
The 125 gal Scale will weigh up to 2000 lbs. (907 kg)
Excellent accuracy and weight resolution of 0.5 lb (226.80g).
Selectable read out options in kg / lb.
Easy to perform re-calibration feature that you can do on site.
Auto select backlight feature.
Auto shut off (selectable).
Tare button / function.
No dealer set up or service required.
1-year warranty.

Specifications:

Actual Scale over all dimensions: 39.4” x 37” (cm x cm).
Power Requirements AC adapter 9V/100mA, 60Hz, or 6AA batteries (not included).
Can be shipped motor freight only, 155 lbs (70 Kg).

Note: International customers with 220-volt electrical power will need to convert 220-volt current to 110 volt. We sell Step Down Transformers, just ask us. You may need to purchase a plug adapter locally. You can also just use 6AA batteries (not included).

Model #	Description	Price
36FS2500	HANDcraft™ 125 Gallon Tank Scale	$1,198.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Weigh your large batches of oils, butters, wax, or anything else you might be heating or melting directly in your Water Jacketed Oil Melting Tank. You raise your efficiency level considerably when you no longer have to weigh a bucket dump it in, weigh again and so forth. Just zero your scale and start filling your tank with your raw materials. Your back will surely thank you 🙂

Description:

This is a very heavy duty scale that is designed to weigh large quantities of oils, butters, waxes, etc.
Efficiently and quickly weigh up to 1000 lbs. (454 kg).
Very accurate for weighing at the high end weight range: 0.02% or 0.2 lbs (90 g) at 1000 lbs. (454 kg).
This Tank Scale is 24”x 24”x 5” High. (61cm x 61cm x 12.7cm).
Scale is encased in a heavy gauge Stainless Steel enclosure.
Easy to Operate: Push button functions for automatic and keyboard tare with memory locations, zero, net/gross, and multiple units conversion (lb, kg, oz, troy, etc.)
The LCD display is large 1" (2.54cm) high graphics digital display on a swivel mount. Easy to read. Updates at 0.4 sec intervals. Can be read 20’ away!

Specifications:

24”x 24”x 5” High. (61cm x 61cm x 12.7cm)
Operating Temperature 14°F to 104°F (-10 to 40 C).
Excellent accuracy and weight resolution: 0.02% or 0.2 lbs, 3.2 oz (90 g) at 1000 lbs. (454 kg).
Display 1" high graphics LCD digits. Updates at 0.4 sec.
Unit conversions available: lbs, kg, oz, troy, gram.
Stainless Steel Cover
Power Requirements 120 VAC, 50/60 Hz.
Note: For our International customers on 220 V, we supply 6 - AA batteries. One set will last 6 months to a year.
For our customers using 120v current, you can use the provided AC adapter.
Can be shipped UPS but we suggest Motor Freight. 60 lbs. (27kg)

Our Tank Scale ships by Truck and therefore cannot be added to our cart. Please Contact Us for ordering or call us for more information! Phone: 765-530-0307 .

Model #	Description	Price
OHS	Tank Scale	$645.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This stand is designed specifically to work with our 45, 60, and 85 Gallon Oil Melter Tanks.

Its also the perfect stand to use with our Oil Melter Tank Scale shown above when you wish to weigh your ingredients.

Heavy duty steel frame has a tough, baked on powder coat finish.

Description:

The Height Adjustable feet can be anchored to the floor for maximum stability.
Constructed out of welded steel and is braced for maximum support.
This heavy duty stand can hold up to 1500 lbs. (680kg).
The tough powder coating finish will protect your stand for many years to come.
The stand is 24”x 24”x 36” high. (71cm x 71cm x 92cm)
Height adjustable legs allow for 1.5” (4cm) more height.
Pad supports are included to use with our optional Tank Scale.
Minor assembly required.
Can ship UPS

Please Contact Us or call for more information! Phone: 765-530-0307.

Model #	Description	Price
1000OHS	Professional Stand	$457.50

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Ever get a little but sloppy with your oils or waxes?

No Problem! We've Got You Covered!

This hood is a good investment as it protects your Thermostat from that occasional oily splash and spill.

Model #	Description	Price
THood	Thermostat Hood	$16.50

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Our Stainless Steel Work Table is the ideal work surface for many of your projects. It also makes a great stand for our 6 Gallon Oil/Wax Melter Tank.

Easy to set up with No tools required.
It comes with a sturdy adjustable chrome plated steel shelf.
Shelf adjusts in increments of 1” (2.54cm)
Strong, heavy duty, easy to maintain and clean.
It has curved edges for your safety.
Chrome plated 1.5"(3.8cm) diameter poles have leveling feet
Dimensions: 49"L x 24"W x 35"H (124cmL x 61cmW x 90cmH)

Model #	Description	Price
AC1123	Stainless Steel Work Table	$249.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Model #	Description	Price
30KOH	Replacement 220 volt / 3000 watt heater / thermostat	$214.80
15KOH	Replacement 110 volt / 1500 watt heater / thermostat	$214.80
50KOH	Replacement 220 volt / 4500 watt heater / thermostat	$214.80

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Our Filling Machine will handle anything from oils, essential oils, lotions, thick creams, honey, jams, jellies and salsas.
You should expect production rates of about 10 bottles per minute (600 per hour), starting out and with experience to reach over 25 per minute (1500 per hour).
Operates Manually or Semi-Automatically.
We have interchangeable product cylinders that range in size from, 3/8" in. to 2 in. (10mm to 50mm) in diameter. This gives you a fill range from .06 to 8.7 fluid ounces (1.7 ml to 257ml), in a single stroke. We work with you to find just the optimum cylinder size or sizes for your applications.
We have found that for most of our customers, the 2" (50mm) cylinder is the ideal size and will fill from, 2 oz. to 8.7 oz (60ml to 257ml) with an accurate fill rate between 1/2% to 1%. You can however, fill as low as 1 oz. (30ml) with the 2" (50mm) cylinder, with an accuracy of 2% to 3%.
For filling large quantities such as a liter or quart size, its just a matter of making more fill cycles. For example; to fill 16 ounce containers, simply set the fill amount to 8 ounces and cycle twice. Or, if filling a 250 milliliter container, set the fill amount to 125ml and cycle twice.
The Easy Fill Bottler is pneumatically operated. It requires 80 to 90 psi (pounds per square inch) of air and about 3.5 cfm (cubic feet per minute).
A small inexpensive compressor is all that is required. These can be found at most hardware stores.
The Easy Fill Bottler is primarily designed to fill your product into containers at estimated speeds of 5 to 20 cpm (containers per minute). Filling speeds are variable and dependent upon the piston stroke length, type of product being dispensed, the viscosity of the product, the ID (inside diameter) of the discharge port in the nozzle and how your product reacts when it hits the bottom of the container.
For most products, cleaning can be done with warm water and a low suds soap. For some liquids and oils, just cycling a little alcohol and water through will be sufficient.
Powered by small Air Compressor (Not included), see specifications.

Easy Fill Bottler

$8,680.00

This item requires customization
and therefore cannot be
added to our cart.
Model 2EFILL

The Easy Fill bottler can also be used for Pumping directly from another vessel; Oil Heater, drum, bucket, etc.

We can supply you with the necessary attachments to pump directly from another container.
Since this is custom fitted, we will need to quote this according to your application needs.
Average cost is about $80 to $100.
- Food grade hose, 3/4" to 1" depending on your application.
- Quick connect and reduction fitting from the Ball Valve.
- Stainless Steel, flare fitting with hose barb at the Easy Fill Bottler inlet.
- All necessary clamps to make connections.
We highly recommend that you place the supply container above the Easy Fill Bottler if you wish to do this. That way the liquid is gravity fed. Although it can pull liquids from below the level of the Easy Fill, it can sometimes pull air into the system that could disrupt the fill accuracy.
Very thick liquids such as heavy creams will not work well using this application.

All metal contact parts are made of stainless steel, the piston and valve spool are made of Ertalyte and all "O"Rings and Gaskets will be made of Viton. The seals made with Viton will withstand petroleum products, essential oils, fragrance oils, vegetable oils and many solvent bases.
The Easy Fill Bottler comes equipped with a 5 gallon stainless steel hopper.
The Easy Fill Bottler is supplied standard with a 2 inch (50mm) diameter stainless steel cylinder.
The machine frame is constructed out of stainless steel.
All connections between the hopper and valve spool, cylinder and valve spool, and nozzle and valve spool are either quick disconnect clamps or quick disconnect fittings. This aids in disassembling and cleaning with ease.
The Easy Fill Bottler is also equipped with two types of machine cycle, start mechanisms, an auto cycle mode and a single cycle foot pedal control.
Base is 19.5" by 9.5" and weighs approximately 75 LB.
The Easy Fill Bottler is also equipped with adjustable stroke rate, control valves. This allows the machines filling speed to be adjusted while the machine is in operation.
Operated by an Air Compressor (Not Included), 90 psi. (6.12 atm), and 1.5 cfm (43 lpm) or more, is all that’s required. Note: “atm & lpm” is a European standard. Your air compressor supplier will know what you need if you give them these figures.
These are available at most lumberyards and hardware stores.
The machine is designed to cycle up to, 40 times per minute.

Increase your Production Levels.
You should expect production rates of about 10 bottles per minute (600 per hour) when starting out. With experience reaching over 25 per minute (1500 per hour).
Saves you Time & Money
Fill hundreds of bottles day with one person! Less labor = Less cost per bottle.
Increased Profit! - Less labor and time means less cost per bottle-Equals More Profit!
Versatile - Filler will handle anything from Oils, Butters, Balms, Salves, Essential Oils/Fragrance Oils to very thick lotions and creams.
For the Food Industry, it will handle hot jams, honey, thick chunky salsas and your favorite sauces. Contact us for additional information.
Operated either Manually or Semi-Automatically.
Willow Way Easy Fill Bottler is used for many types of applications in the food, cosmetic, and personal care industries.
Can be supplied with additional interchangeable cylinder and piston assemblies to fill from fractional ounces to one gallon with a single machine cycle.
Small Footprint - The EZ Fill Bottler is only 19.5" by 9.5" in size and weighs approximately 75 LB.

Model	Description	Price
Drum-EF	Drum to Easy Fill. All fittings and Ball Valve. Quick Connect 1" Hose Assembly	$114.69
Tank-EF	Oil Melter Tank to Easy Fill Quick Connect 1" Hose Assembly	$111.35
Bucket-EF	Bucket to Easy Fill Quick Connect 1" Hose Assembly	$63.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Model #	Description	Price
EF2Ring	Easy Fill, 2" Piston, O-Rings 4 each Replacement O-rings for the Easy Fill Bottler, Piston. At each end of the Piston is one ring, two total. See instructions and CD for replacement.	$5.00 Pkg of 4
EF1.75Ring	Easy Fill, 1.75" Spool, O-Rings Replacement O-rings for the Easy Fill Bottler, Spool. 4 each 1.75” O-Rings At each end of the Spool is one ring, two total. See instructions and CD for replacement	$4.00 Pkg of 4
EFGrease	Easy Fill, Food-Grade Grease, 14 oz. (398g) Food-Grade Grease for lubrication of the Piston, Spool and various parts of the Easy Fill Bottler. This is very high quality, food grade grease. Ideal for the Easy Fill Bottler 14 ounce (398 gram) tube.	$16.45 ea

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This Drum Heater is a must have if you deal with bulk ingredients that comes in drums. Ingredients such as coconut oil or butters such as cocoa, mango, shea or avocado oftentime solidify at room temperature and need to be warmed to a more manageable viscosity to pump out.

Safe to use on Plastic 55 gal. (208L) drums.
Constructed with a Tough and Flexible silicone rubber. Withstands oils and even lye spills for those hand craft soap makers.
Quick installation with easy operating fasteners
Adjustable thermostat control, up to 140 F (60 C).
1,000 watts, just the right amount of wattage to prevent damage to your oils and heat in an efficient and timely manner. The most efficient way to use your drum heater is to place it on a timer. That way you can turn it on and heat in the early morning hours before the start of your work day.
3" (10cm) width x 22 1/2" (57cm) nominal diameter.
6' (183cm) cord
120 volt, 8.5 amps.
Do you have a special requirement? We can customize for any application. Just contact us.
Need more temperature control? We can custom build it for you.
Note: When a plastic drum is used, wrap a section of 8" aluminum flashing around drum and under band heater.

Model #	Description	Price
AC1175	1000 Watt Drum Heater (120 volt)	$196.00 each

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This is a must have if you deal with bulk oils or butters in drums. Sometimes your materials need to be warmed to a more manageable viscosity to pump out of your drum. This Drum Heater is designed for heating vegetable oils and butters that can go solid at room temperature.

Safe enough to use on Plastic 55 gal. (208L) drums.
Tough and flexible silicone rubber construction. Withstands oil and lye spills.
Easy operating fasteners for quick installation.
Adjustable thermostat control, 50 to 425 F (10 - 218 C).
1,200 watt, just the right amount of wattage to prevent damage to your oils yet heat in a timely and efficient manner. The most efficient way to use your drum heater is to place it on our optional timer. Simply set the timer to turn on and heat your drum in the early morning hours before the start of your work day.
4" (13cm) width x 22 1/2" (57cm) nominal diameter.
6' (183cm) cord
220 volt, 5.5 amps.
Note: When a plastic drum is used, its recommended to wrap a section of 8" aluminum flashing around drum and under band heater. Do not turn thermostat past what it takes to warm your oils.
Note: With the numerous types of 220 volt plug configurations, we cannot match all styles. Your Plug should be wired on site.

Do you have a special requirement? We can customize for any application. Need more temperature control? We can build it.

Model #	Description	Price
AC1176	1200 Watt Drum Heater (220 volt)	$239.00 each

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

You can cut your energy usage drastically when you cover your drums with an insulation jacket. And…it will also save you time because your oils and butters will heat faster and stay heated longer.

Description:

The highly reflective and extremely efficient material will effectively conserve heat and energy to save you money. Our Universal Drum Insulation Jacket is made with a tough ,high R-value, heat resistant foam core and heavy foil lining inside and out.
Your Jacket kit is pre-cut, top, bottom and side panel. In about ten minutes, you can have your drum jacket fitted and ready to use.
The kit includes 4 pieces of industrial strength Velcro strips along with instructions. The only tools you need is a box cutter or sharp knife.
Oils and heat do not affect its insulation value.
Note: This jacket is specifically designed to work with our Drum Heaters. The jacket material has a specific limit of 160° (71°C). Our Drum Heaters will not damage the integrity of the insulation by overheating.

Specifications:

Made of ¼” (7mm), High R, Foam Core, Double Faced, insulation
Heavy duty Velcro strips included
Can be shipped UPS

Model #	Description	Price
DrumIJ	Universal Drum Insulation Jacket	$65.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Continuous Duty Bucket Heater. This is the Heater to get when you want a reliable bucket heater for efficient continuous usage 24/7. We added more robust wiring and lowered the wattage to 100 watts so that this heater can be left on continuously.

Description:

Great for both plastic and metal buckets due to the low wattage.
Easy to attach and move from pail to pail.
The HANDcraft™ 100 Watt Bucket Heater has an adjustable thermostat for perfect control.

Specifications:

Triple hook and eye attachment with ultra-precision Bungee Cord. This allows a snug fit on any 5 or 6 gallon bucket/pail.
Working diameter of pail possible is 9.5” to 12” (24cm to 30cm).
Great surface coverage and heat dispersal with the Wide 3” (76mm) Silicone Belt.
100 watts…..120 volt AC…..72 inch (183cm) cord.
Adjustable Thermostat: 110 - 140 F (43 – 60 C).
Will not overheat your plastic pail or bucket.

Model#	Description	Price
AC1178a	100 Watt Bucket Heater	$179.00 each

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

This Bucket Heater is suitable for both plastic or metal buckets. Our HANDcraft™ Bucket Heater is easy to attach and has an adjustable thermostat for precise control. Can be used with our AC1179 Timer so your oils and butters are heated and ready when you are.

Triple hook and eye attachment with ultra-precision Bungee Cord. Give a snug fit on any 5 or 6 gallon pail or bucket.
Working diameter of pail possible is: 9.5” to 12” (24cm to 30cm).
Wide 3” (76mm) Silicone Belt for great heat dispersal and surface coverage.
200 watts…..120 volt AC…..72 inch (183cm) cord.
Adjustable Thermostat from 100 - 140 F (38 – 60 C).
Will not overheat your plastic buckets or pails.

Model #	Description	Price
AC1178	200 Watt Bucket Heater	$159.00 each

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

By covering your buckets or pails with an insulation jacket, you can cut your energy usage drastically. It will also save time because your materials will stay heated longer and heat faster.

Description:

This Universal Bucket Jacket will fit any 5 or 6 gallon plastic or metal buckets and pails.
Jacket is made with a tough, heat resistant foam core and heavy foil lining, inside and out for a high R-value.
Save you money. The highly reflective material is extremely efficient in conserving heat and energy.
Your Jacket kit is pre-cut, top, bottom and side panel. It will take about 5 minutes to have your jacket fitted and ready to go.
Your kit includes all you need to insulate your pail or bucket. Simple Instructions are included.
Oils and heat will not affect its insulation value.
Note: The jacket has a specific limit of 160° (71°C). This jacket is specifically designed to work with our Bucket Heaters. Our Bucket Heaters will not damage the integrity of the insulation by overheating.

Specifications:

Made of ¼” (7mm), High R, Foam Core, Double Faced, insulation
Heavy duty Velcro strips included
Can be shipped UPS

Model #	Description	Price
BucketIJ	Universal Bucket Insulation Jacket	$24.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Have time work for you with an automatic timer. Simply set the timer for when you want your Oil Melting Tank to turn on and walk away. You can have it start in the early morning hours so your oils or butters are warm and ready for the work day. Or candle makers, save time having your wax melted and ready to pour into molds when you arrive to work.

This 1800 watt Timer can be used on the following 110/120 volt oil melting tank models:

Description:

1 ON / 1 OFF settings per day. A total of 7 ON / 7 OFF settings per week.
Can be used with 3 separate programming options: Same settings Monday through Friday, Same settings Saturday and Sunday, Same settings for all 7 days of the week.
Two Timed, Grounded Outlets.
Has a cover to protect against dust and moisture.

Specifications:

One replaceable AA battery (included) maintains your programing during power failures and will keep time up to 3 months.
Time of Day display will automatically adjust for Daylight Savings Time.
Easy hand-held programming
120 Volts, 60 Hz, 24 inch cord.
15 Amps, handles up to 1800 watts.
1 year manufacturer warranty

Model #	Description	Price
AC1179	HANDcraft™ Heater Timer 1800 watt	$80.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Save energy and have time work for you. Just set the timer to have your oils, butters or other ingredients in your tank heated and ready for you the next work day.

You can use this 7200 watt Timer on our 220/240 volt models of the following tanks:

Description:

Save energy; no need to leave your oil tank Heater on all night.
Save time; why waste part of your day waiting for the oils, butters or waxes to heat up?
Dependable and Easy to use, comes with battery back up.
Up to 6 set points, 6 ON / 6 OFF, can be programmed daily.
5-day work week scheduling, weekend scheduling or any individual day scheduling.
LED load indicator.
AA battery protects against loss of programming.
You can manually override at any time.
Has a lockable cover to protect against dust and moisture.

Specifications:

Steel enclosure
Double pole switching
30 Amps/pole
120 thru 277 volt input
3 year user replaceable battery back up

Model #	Description	Price
AC1177	HANDcraft™ Heater Timer 7200 watt	$165.00

All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Oil Melting Tanks

Water Jacket Stainless Steel Tanks

Slow Speed Mixer

Slow Speed Mixer for Oil/Wax Melter Tanks

Insulating Tank Jacket

Oil Melter Tank Insulation Jacket

Ball Valve Heater

HANDcraft™ Ball Valve Heater

HANDcraft™ Heated Valve Assembly

Reducer for 1.5 inch Ball Valve

HANDcraft™ Brass Ball Valve

Faucet for Water Jacket Drain

1.5 Inch Replacement Ball Valve

HANDcraft™ 125 Gallon Tank Scale

Oil Melter Tank Scale

Stand for Oil Heater/Melter Tank & Scale

Thermostat Hood

Stainless Steel Work Table

Replacement Heater/Thermostats for Tanks

Easy Fill Bottler

Willow Way Professional Easy Fill Bottler

What comes with your Willow Way Easy Fill Bottler

Additional uses for Bottler

Specifications:

click on image to enlarge

Benefits

Options for Easy Fill Bottler

Replacement Parts for Easy Fill Bottler

Drum and Pail Heaters

1,000 Watt -120 volt Drum Heater

1,200 Watt -220 volt Drum Heater

Universal Drum Insulation Jacket

100 Watt Bucket - Pail Heater

200 Watt Bucket - Pail Heater

Universal Bucket Insulation Jacket

Heater Timer 1800 watt

Heater Timer 7200 watt