Oil Melting Tanks – Oil Melting Tanks

At Willow Way, we design and manufacture our line of Water Jacketed Oil Tanks (Melters) for heating and melting room temperature solid oils, vegetable butters and candle wax. Also great for making Handcrafted Soaps. We have served the HandCrafted Body Care Industry since 1996 using only the finest materials available.

Our Stainless Steel Oil Tanks (Melters) are built to serve you for years to come. Most of our tanks have a Sloped Bottom to Increase Efficiency and Clean Up. Available in 7 sizes to fit most any need… from a 6 gallon Water Jacketed Tank to the largest of our stock melter heater tanks, the 125 gallon Water Jacketed Tank. (Custom sizes are available upon request)

Heater - Thermostat, 3/4 Inch Brass Ball Valve, Cord & Lid.
Molded high-temp handle on lid keeping it cool to the touch. No need for heat protective gloves.
Extra Heating Element. You may never need to use it, but should the need ever arise, its really great to have a spare.
3/4” (1.9cm) brass outlet with 90 degree brass elbow. Tip: Check out our optional Ball Valve Heater. When working with wax or oils and butters that go solid at room temperature, flow can be blocked in the Ball Valve when it sets up hard. Just heat it to melt. A headache free way.
½” (13mm) Inlet and Outlet for filling and draining your water jacket.
Outlet & Valve Cleaning Brush
Pipe Seal included.
Simple to follow Operating Instructions.
We include a tried and true formula with instructions for making Liquid Soap. Take advantage of the versatility of your tank. Why not?

6 Gallon (48 lbs) Oil Melting Tank

$1,025.00

All Stainless Steel Construction
Includes Lid, Heater - Thermostat, 3/4 Inch Brass Ball Valve & Cord.
Model 6MH

Water Jacketed Tank ensures your oils, butters, wax, soaps and cremes are safe from hot spots that could burn and scorch.
Even controlled heat and temperature regulation. Maintain the quality and integrity of your ingredients and products.
All Willow Way tanks are constructed with Cosmetic Grade Stainless Steel. Can be used for Certified Organic production.
Increased production levels save you time and money while using less labor. All of this Equals More Profit for you!
Extremely easy to setup, use and maintain. Clean up is a total breeze!
Get Going FAST!! 95% of the time, there is seldom a need for tools during tank installation.
Highly Versatile Heater/ Oil Melter Tank - Use for melting Oils, Butters, Candle Wax, M&P, and much more. Anything that needs even controlled heat safe from the risk of hot spots burning your ingredients.
Attention Candle Makers - This oil melting tank is perfect for melting your candle wax. Also use it when blending your fragrances and colors. Dispense directly into your candle molds or even use for handcrafted dipping candles.
This tank unit can be attached directly to our EZ Fill Bottler.
Constructed to Last. Designed and Built with High quality materials to serve your needs for many years to come.
Water Inlet and Outlet Fittings make it easy to flush out heated water from the water jacket.
- See our optional “Faucet for Water Jacket”.
- You can replace the water jacket drain plug with a faucet which allows you to control the flow just by turning the handle. A standard garden hose can be connected for easy drainage.
Don't have a need to flush your water jacket? Then you can also use Mineral Oil or Propylene Glycol (PPG) instead of water.
- Its slower to heat than water but has better heat retention. Evaporation is less of an issue as well.
- Less maintenance is required.
- Allows for higher temperatures.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.
Our Stainless Steel Work Table makes the perfect stand for this 6 gallon tank.

Capacity: approximately 6 gal. (22.7L) or 48 lbs (21.8Kg) in weight.
Water Jacket Volume: approximately 4.8 gal (18.09L).
Exterior dimensions: 18 11/16” (8.86cm) high by 13” (5.11cm) in diameter.
Interior dimensions: approximately 14 ½” (36.83cm) x 10 13/16" (27.46cm)
Outer water jacket tank is Water boiler style with flat bottom.
Both inner and outer tanks, the lid and all fittings are cosmetic and food grade 304 Stainless Steel. Meets organic certification requirements.
½” (13mm) Inlet and Outlet
3/4” (1.9cm) brass outlet with 90 degree brass elbow.
UL approved components.
Heater - 120 Volt, 1500 watt / Thermostat - (50F to 250F) (10C to 121C).
Note: Domestic and International customers requiring 220 volt 50 or 60 cycle, we can substitute our 220 volt, 3000 watt Heater – Thermostat at no additional change. Just let us know your preference when ordering. The Plug may be need to be changed to meet your local or country electrical codes.
Current draw - 12.5 amps at 120 volts
Protective Crating is included in pricing.
UPS shipment is available.

Heating Element, Thermostat with Cord.
Lid with a molded high-temp handle eliminating the need to wear heat protective gloves.
Extra Heating Element. A spare is really great to have just in case, but chances are you may never need to use it.
Large 1 ½” (38mm), Three-Way Ball Valve to make dispensing thick liquids easy. Tip: Working with oils or wax that can set up hard with room temperature may block the flow of your ball valve. Check out our optional Heated Valve Assembly. Just heat it to melt, no blockage - headache free.
Adjustable Ball Valve tension.
Dispenses at a 90° angle for minimal number of required fittings.. and it also makes it easier to clean.
½” (13mm) Inlet and Outlet for filling and draining the water jacket.
Outlet & Valve Cleaning Brush
Pipe Seal is included.
Simple to follow Operating Instructions.
With such a versatile tank, we also include a great formula and instructions for making Liquid Soap.

13 Gallon (100 lbs) Oil Melter Tank

120 Volt 1500 Watt

$1,142.00

All stainless steel construction
120 V 1500 W, Heater - Thermostat
Model 13MH

13 Gallon (100 lbs) Oil Melter Tank

220 Volt 3000 Watts

$1,142.00

All stainless steel construction
220 V 3000 W, Heater - Thermostat
Model 13MH220

Both inner and outer tanks, lid and all fittings are 304 Stainless Steel. Its cosmetic grade and meets organic certification requirements.
Capacity - Approximately 13 gal. (49L), 100 lbs (45.359Kg) in weight.
Water Jacket Volume - approximately 8.15 gal (30.71L)
Exterior dimensions - 21” (53cm) high by 18” (46cm) in diameter.
Outer water jacket tank is Water boiler style with flat bottom.
Interior dimensions - approximately 15" x 16"
½” (13mm) Inlet and Outlet
Large 1 ½” (38mm), Three-Way Ball Valve outlet with 90 degree elbow.
Heater - 120 Volt, 1500 watt / Thermostat - (50F to 250F) (10C to 121C).
Note: For International and Domestic customers requiring 220 volt 50 or 60 cycle, order our Model 13MH220. We substitute our 220 volt, 3000 watt, Heater – Thermostat at no additional change. Just let us know your preference.
Plug may be need to be changed to meet your local or country electrical codes.
Countries with 50 Hz electrical power; wattage will be approximately 17% less than the wattages shown.
Current draw is, 12.5 amps at 120 volts
UL approved components.
Can ship via UPS. Weighs 45 lbs (20Kg), Oversize @ 70 lbs (32Kg). Crating included in pricing.

Highly Versatile All Purpose heater/melter Tank - Melts Oils, Butters, Cremes, Candle Wax, M&P, and more. Anything that needs even controlled heat without the risk of hot spots burning your product.
Get Going FAST!! Extremely easy to setup, use, and maintain. 95% of the time, there is rarely even a need for tools during tank installation. And hey, Clean Up is a breeze!!
Increasing your Production levels saves you time, labor and money. All of this Equals More Profit for you!
Controlled temperature regulation and even heating maintains the quality and integrity of your product.
A Water Jacketed Tank ensures your ingredients stay safe from hot spots that could scorch or burn.
Built with Cosmetic Grade Stainless Steel that can be used for Certified Organic production.
Candle Makers - This heating tank is perfect for melting your candle wax and blending your fragrances and colors. You can dispense right into your candle molds or even use for artistic dipping candles.
This unit can be attached directly to our EZ Fill Bottler for an easy way to dispense into bottles or jars.
Designed to Last - Constructed with high quality materials that will serve your needs for many years to come.
Flushing out the heated water from the water jacket is made easy with Water Inlet and Outlet Fittings.
- Check out our optional “Faucet for Water Jacket”. It replaces the water jacket drain plug so you can control the flow just by turning the handle. A standard garden hose can be connected for easy drainage.
If you don't need to flush the water jacket, you can fill with Mineral Oil or Propylene Glycol (PPG) instead of water.
- Its slower to heat than water but has much better heat retention, plus evaporation is less of an issue.
- Less maintenance is required.
- Allows for higher temperatures.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.
Check out our Stainless Steel Work Table. It makes a great, easy to clean work space.

20 Gallon (160 lbs) Oil Melter Tank

120 Volt 1500 Watt

$1,370.00

All stainless steel construction
120 V, 1500 W, Heater - Thermostat
Model 20MH

20 Gallon (160 lbs) Oil Melter Tank

220 Volt 3000 Watts

$1,370.00

All stainless steel construction
220 V, 3000 W, Heater - Thermostat
Model 20MH220

Sloped Bottom on the inner tank for more efficient and faster drainage of your oil, wax, lotions, soaps, creams, etc.
Heating Element, Thermostat with Cord, Lid & 3 way ball valve.
Lid has a molded high-temp handle so there is no need to wear heat protective gloves for the lid handle.
Extra Heating Element is included. Its likely you may never need it, but its just smart to have a spare should the need ever arise.
Large 1 ½” (38mm), Three-Way Ball Valve makes dispensing thick liquids easy.
- Adjustable Ball Valve tension.
- Dispenses at a 90° angle for minimal number of fittings required.. easier to clean.
Tip: Check out our optional Heated Valve Assembly. If you work with ingredients like oils, butters or wax that set up at room temperature, this can result in flow blockage in your Ball Valve. Just heat it to melt.
UL approved components.
½” (13mm) Inlet and Outlet for filling and draining the water jacket.
Outlet & Valve Cleaning Brush
Pipe Seal is included.
Simple to follow Operating Instructions.
This tank is so versatile we also include a formula and instructions for making Liquid Soap.
Crating included in pricing.

Approximately 20 gal. (75.7L) capacity, 160 lbs (72.6Kg) in weight.
All Stainless Steel construction. Cosmetic grade and meets organic certification requirements.
The Water Jacket Volume is approximately 12.34 gal (46.7L)
Exterior dimensions 25” (cm) high by19 ¾” (cm) in diameter.
Interior dimensions approximately 19 13/16" x 17"
Large, 1.5” (3.8cm) outlet.
120 Volt, 1500 watt, Heater - Thermostat (50F to 250F) (10C to 121C).
Current draw is, 12.5 amps at 120 volts
Can ship via UPS. Weighs 56 lbs (25.4Kg), Oversize @ 85 lbs (38.5Kg).

Note:

For International customers with 220 volt 50 or 60 cycle we substitute our 220 volt, 3000 watt Heater - Thermostat.
Domestic customers that wish to use 220 volt, just order our Model 20MH220. There is no additional charge.
Please note this uses a Nema 6/20p Plug.
Your plug may need to be changed to conform with local or country codes.
If you have any doubt about your electrical power requirements call your electric provider or electrician.

Even controlled heat and temperature regulation for maintaining the quality and integrity of your product.
Water Jacketed Tank. Your oils, waxes, M&P, lotions, cremes, etc. are safe from hot spots that could scorch your product.
Our premium Willow Way tanks are made with Cosmetic Grade Stainless and can be used for Certified Organic production.
Production levels increase saving you both time and money while using less labor. All of this Equals More Profit for you!
Extremely easy to setup, clean, use, and maintain. Clean up is a breeze with the sloped inner tank bottom.
Get Going FAST!! 95% of the time, there is rarely even a need for tools during tank installation.
Highly Versatile All Purpose Oil heater/melter - Use for melting Oils, Candle Wax, Butters, M&P, and more. Anything that needs even controlled heat without the risk of hot spots burning your product.
Candle Makers - This heating tank is perfect for melting candle wax and blending your fragrances and colors. You can dispense right into your candle molds or even use for dipping hand crafted candles.
This unit can be directly attached to our EZ Fill Bottler.
Built to Last - Designed to serve your needs for many years to come. High quality materials and construction.
Water Inlet and Outlet Fittings make it easy to flush out the heated water from the water jacket.
- Check out our optional “Faucet for Water Jacket”. It replaces the water jacket drain plug allowing you to control the flow just by turning the handle. A standard garden hose can be connected for easy drainage.

Sloped Bottom inner tank. It makes cleaning easier with more efficiency and faster drainage of your oils or waxes.
Heating Element, 1.5 Inch Ball Valve, Thermostat with Cord & Lid.
Extra Heating Element. Having a spare is always a good idea even though chances are you may never need it.
Lid has a molded high-temp handle to safely handle without heat protective gloves.
Large 1 ½” (38mm), Three-Way Ball Valve for dispensing thick liquids with ease. Tip: See our optional Heated Valve Assembly. Ingredients like oils that solidify at room temperatures or wax setting up hard in your Ball Valve can block flow. Just simply heat it to melt without the headaches.
- Adjustable Ball Valve tension.
- Dispenses at a 90° angle for easier cleaning with minimal number of fittings required.
½” (13mm) Inlet and Outlet for filling and draining your water jacket.
UL approved components.
Outlet & Valve Cleaning Brush, Pipe Seal also included.
Simple to follow Operating Instructions.
With such a versatile tank, we've also included a formula and instructions for making Liquid Soap.
Crating included in pricing.

45 Gallon (360 lbs) Oil Melter Tank

220 Volt 3000 Watt

$1,895.00

Requires Motor Freight Shipping
Price Does not include Shipping
Please Contact us to Order
Model 45MH

Controlled temperature regulation and Even Heat helps maintain the quality and integrity of your product.
Your oils, butters, or waxes are safe from hot spots with a Water Jacketed Tank.
Premium tanks are built with Cosmetic Grade Stainless and can be used for Certified Organic production.
You save both time and money with Increased Production levels. You also use less labor. All of this Equals More Profit for you!
Extremely easy to setup, use and maintain. Clean up is easy with the inner sloped tank bottom.
Get Going FAST!! About 95% of the time, there is rarely a need for tools during tank installation.
Highly versatile, all Purpose heater/oil melting tank. Use for melting your Oils, Candle Wax, Butters, M&P, making cold processed soap, lotions, creams and more. Anything that needs even controlled heat without the risk of hot spots.
Dispense from the tank right into your bottles or containers. This tank unit can be directly attached to our EZ Fill Bottler.
This heating tank is also perfect for Candle Makers. Just melt your candle wax, blend your essential oils or fragrances and colors directly in the tank, and then dispense right into your candle molds.
High quality construction and materials are Built to Last and designed to serve your needs for many years.
Water Inlet and Outlet Fittings make it easy to flush out the heated water from the water jacket.
Check out our optional “Faucet for Water Jacket”. You can replace the water jacket drain plug allowing you to better control of the flow just by turning a handle. A standard garden hose can be connected for easy drainage.
If you don't need to flush your water jacket, you can also use Mineral Oil or Propylene Glycol (PPG) instead of water.
- Its slower to heat than water and has better heat retention. Evaporation is less of an issue.
- Less maintenance is required. Allows for higher temperatures.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.

Draws about 14 amps, has a Nema 6/20p style plug.
220 Volt, 3000 watt, Heater - Thermostat (50F to 250F) (10C to 121C).
Outside dim. are 29" (74cm) high by 26" (66cm) in diameter.
The Water Jacket Volume is approximately 17.75 gal (66.74L)
Approximately 45 gal (170L) capacity or approximately 360 lbs (163Kg).
All stainless steel construction.
Must be shipped Motor Freight (Shipping Not Included in Price).

Note: This unit is compatible for all International customers.

The plug will most likely need to be changed to conform with your local codes.

If you have any doubt about your electrical power requirements please call your electric provider or electrician.

Sloped Bottom for more efficient and faster drainage and dispensing of your product.
Heating Element, 1.5 Inch Ball Valve, Lid, Thermostat with Cord.
The Lid has a molded high-temp handle that is safe to touch without the need to wear heat protective gloves.
UL approved components.
Extra Heating Element. Its always great to have a spare should the need arise. Chances are you may never need it though.
Large 1 ½” (38mm), Three-Way Ball Valve for ease in dispensing thick liquids. Tip: See our optional Heated Valve Assembly. It saves on headaches if you work with ingredients like wax or oils that solidify that could set up hard in your Ball Valve blocking flow. Just heat it to melt.
- Adjustable Ball Valve tension.
- Dispenses at a 90° angle for minimal number of fittings required.. easier to clean.
½” (13mm) Inlet and Outlet for filling and draining the water jacket.
Outlet & Valve Cleaning Brush. Pipe Seal is also included.
Simple to follow Operating Instructions.
This is a versatile tank, we also include a formula and instructions for making Liquid Soap. Why not? 🙂

60 Gallon (480 lbs) Oil Melter Tank

220 Volt 4500 Watt

$2,680.00

Requires Motor Freight Shipping
Price Does not include Shipping
Crating is included in Pricing
Please Contact us to Order
Model 60MH

Our Willow Way tanks are made with Cosmetic Grade Stainless and can be used for Certified Organic production.
Highly Versatile - All Purpose heater/melter to use for melting Oils, Candle Wax, Butters, M&P, and making items such as Liquid Soaps, Cold or Hot Processed soaps, Creams, Lotions and more. Anything that needs even controlled heat without the risk of hot spots burning your product.
Water Jacketed Tank design keeps your ingredients safe from hot spots scorching your product.
Your Production levels increase saving you both time and money while using less labor. All of this Equals More Profit for you!
Extremely easy to setup, clean, use, and maintain. Get Going FAST!! 95% of the time, there is rarely even a need for tools during tank installation.
Clean up is a breeze with the sloped inner tank bottom.
Candle Makers - This heating tank is perfect for melting candle wax, blending your fragrances and colors, and then dispensing right into your candle molds.
This unit can be directly attached to our EZ Fill Bottler.
Built to Last - Designed to serve your needs for many years to come with High quality construction and materials.
Water Inlet and Outlet Fittings make it easy to flush out the heated water from the water jacket.
Check out our optional “Faucet for Water Jacket”. It replaces the water jacket drain plug that allows you to control the flow just by turning the handle. A standard garden hose can be connected for easy drainage.
Don't have a need to flush your water jacket? You can also use Mineral Oil or Propylene Glycol (PPG) instead of water.
- Its slower to heat than water and has better heat retention, plus evaporation is less of an issue.
- Less maintenance is required. Allows for higher temperatures.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.

All stainless steel construction.
Approximately 60 gal (227L) capacity or approximately 480 lbs (218Kg).
The Water Jacket Volume is approximately 21.80 gal (82.47L)
Outside dim. are 33" (84cm) high by 28" (71cm) in diameter.
Water jacketed, with a 1.5” (3.8cm) outlet.
220 Volt, 4500 watt, Heater - Thermostat (50F to 250F) (10C to 121C). Draws about 21 amps, and has a, Nema 6/20p style plug. Note: This unit is compatible for all International customers. The plug will have to be changed to conform with local codes. If you have any doubt about your electrical power requirements call your electric provider or electrician
Must be shipped Motor Freight (Shipping Not Included in Price). Can not be added to the cart, please contact us to order.

Sloped Bottom for more efficient and faster drainage of products and ingredients.
Lid, Heating Element, 1.5 Inch Ball Valve, Thermostat with Cord.
Lid is designed with a molded high-temp handle. No need to wear heat protective gloves to lift the lid.
UL approved components.
Extra Heating Element. Chances are you may never need to use it, but its really great to have a spare should the need ever arise.
Large 1 ½” (38mm), Three-Way Ball Valve for ease in dispensing thick liquids such as creams. Tip: Check out our optional Heated Valve Assembly. If you work with ingredients like wax or oils that solidify at room temperature, these could set up hard in your Ball Valve blocking flow. Now you can just heat it to melt and save on the headaches. 🙂
- Adjustable Ball Valve tension.
- Dispenses at a 90° angle for minimal number of fittings required.. much easier to clean.
½” (13mm) Inlet and Outlet for filling and draining the water jacket.
Outlet & Valve Cleaning Brush
Pipe Seal is included.
Simple to follow Operating Instructions.
Psst....This tank is so versatile we also include a formula and instructions for making Liquid Soap.

85 Gallon (680 lbs) Oil Melter Tank

220 Volt 9000 Watts

$3,590.00

Requires Motor Freight Shipping
Price Does not include Shipping
Crating is included in Price
Model 85MH

Our Willow Way premium tanks are made with Cosmetic Grade Stainless and can be used for Certified Organic production.
Even controlled heat and temperature regulation necessary for maintaining the quality and integrity of your ingredients.
Water Jacketed Tank eliminates hot spots that could potentially scorch or burn your oils, butters, waxes, etc.
Production levels increase saving you both time and money while using less labor. All of this Equals More Profit for you!
Extremely easy to setup, easy to use, and easy to maintain.
Get Going FAST!! 95% of the time there is rarely even a need for tools during your tank installation.
Clean up is a breeze with the custom designed sloped inner tank bottom.
Highly Versatile All Purpose heater/melter - Use for melting Oils, Butters, Candle Wax, M&P, and more. Anything that needs even controlled heat without the risk of hot spots burning your product.
Candle Makers - This heating tank is perfect for melting candle wax, blending your fragrances and colors, and then dispensing right into your candle molds.
This unit can be directly attached to our EZ Fill Bottler.
Built to Last with High quality materials. This tank will serve your needs for many years to come .
Water Inlet and Outlet Fittings make it easy to flush out the heated water from the water jacket.
See out our optional “Faucet for Water Jacket”. It replaces the water jacket drain plug. This allows you to control the flow just by turning a handle. A standard garden hose can be connected to make draining it easy.
You can also use Mineral Oil or Propylene Glycol (PPG) instead of water if you don't have a need to flush your water jacket.
- Its slower to heat than water and has better heat retention, plus evaporation is less of an issue.
- Less maintenance is required.
- Allows for higher temps when the tank is required for other purposes.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.

All stainless steel construction.
Approximately 85 gal (321.76L) capacity or approximately 680 lbs (308Kg).
The Water Jacket Volume is approximately 26.37 gal (99.41L)
Outside dim. are 37" (94cm) high by 31" (79cm) in diameter.
9,000 watts - 2 each - 220 Volt, 4500 watt, Heater Units. Thermostats (50F to 250F) (10C to 121C).
Each draws about 21 amps and has a, Nema 6/20p style plug.
Must be shipped Motor Freight (Shipping Not Included in Price)

Note: This unit is compatible for all International customers. The plug will have to be changed to conform with local codes. If you have any doubt about your electrical power requirements call your electric provider or electrician.

Sloped Bottom for more efficient and faster drainage of your oil or wax.
Heating Element, Lid, 1.5 Inch Ball Valve, Thermostat with Cord.
Lid is designed with a molded high-temp handle eliminating need for heat protective gloves.
UL approved components.
Extra Heating Element included. Its always a good ideal to have a spare should the need arise, but chances are you may never need to use it.
Large 1 ½” (38mm), Three-Way Ball Valve for dispensing thick liquids and cremes with ease. Tip: See our optional Heated Valve Assembly. Working with ingredients that solidify at room temperature could set up hard blocking the flow in your ball valve. Just heat it to melt without the headaches.
- Adjustable Ball Valve tension.
- Dispenses at a 90° angle, this makes it easier to clean with a minimal number of fittings.
½” (13mm) Inlet and Outlet for filling and draining the water jacket.
Outlet & Valve Cleaning Brush. Pipe Seal is also included.
Simple to follow Operating Instructions.
With the versatility of this tank, we also include a formula and instructions for making Liquid Soap. Why not? 🙂
Crating included in pricing.

125 Gallon (1000 lbs) Oil Melting Tank

220 Volt 9000 Watts

$4,425.00

Large Tank - Stand not included
Requires Special Shipping
Contact us to Order
Model 125MH

Even controlled heat and temperature regulation to maintain quality and integrity of your products.
Water Jacketed Tank. Your oils, butters, soaps, lotions, candle wax, etc. are safe from hot spots scorching ingredients.
Constructed with Cosmetic Grade Stainless and can be used for Certified Organic production.
Increased production levels save you both time and money while using less labor. All of this Equals More Profit for you!
Super easy to setup, use, and maintain.
Get Going FAST!! 95% of the time there is rarely a need for tools during tank installation.
The sloped inner tank bottom makes clean up a breeze.
Highly Versatile All Purpose heater/melter - Use for melting your Oils, Waxes, Vegetable Butters, M&P Soap, and more. Anything that needs even controlled heat without the risk of hot spots burning your product.
Perfect tank for dispensing right into your bottles, jars or containers. This unit can be directly attached to our EZ Fill Bottler.
Great for candle makers too. Melt your candle wax, blend your fragrances, essential oils and colors directly in the tank and then dispense right into your candle molds.
Designed to Last - Your tank will serve your needs for many years to come. High quality construction and materials.
Water Inlet and Outlet Fittings make it easy to flush out the heated water from the water jacket.
Check out our optional “Faucet for Water Jacket”. It replaces the water jacket drain plug. This allows you to control the flow just by turning the handle. A standard garden hose can be connected for easy drainage.
If you don't have a need to flush your water jacket, you can also use Mineral Oil or Propylene Glycol (PPG) instead of water.
- Its slower to heat than water and has better heat retention.
- Evaporation is less of an issue. - Less maintenance is required.
- Allows for higher temperatures.
- NOTE: When using PPG always be sure to use food grade quality with inhibitor.

All stainless steel construction.
Approximately 125 gal (473.17L) capacity or approximately 1,000 lbs (454Kg).
The Water Jacket Volume is approximately 33.64 gal (127.34L)
Outside dimensions are 45” high by 32” in diameter
9,000 watts - 2 each - 220 Volt, 4500 watt, Heater Units. Thermostats (50F to 250F) (10C to 121C). Each draws about 21 amps and has a, Nema 6/20p style plug. Note: This unit is compatible for all International customers. The plug will have to be changed to conform with local codes. If you have any doubt about your electrical power requirements call your electric provider or electrician.
Must be shipped Motor Freight (Shipping Not Included in Price).

The heating element is located right in the water-bath. This gives you very fast heating times.
Our All Purpose melter is built to last you a lifetime of hard work.
A stainless steel plate is included and is used to support your Pots or Pitchers in the water-bath above the heating element.
Make sure to keep Water depth above the plate about 2” (5cm).
Melter has a handy drain valve where you can just place it next to your sink or drain directly into a bucket when its time to change out the water.
Hand Holds are lasered right into the body of the melter making it easy to move around.

Diameter: 18” (46cm)
Height: 12” (31cm) without pitchers or pots.
Temperature: 0° to Boiling.
Adjustable Thermostat shows both F° & C°.
Constructed with highly durable 304 Stainless Steel.
Heating Element: 1500 watt @ 120 volt. The element is simple to replace but will last many years with proper care. Always keep the water level 2 inches above the steel plate.
International or Domestic 220 volt installations: 220-240 volt, 3000 watt element are available upon request. Just let us know when you place your order.
Amperage: 120 volt = 12.5 amps, 220-240 volt = 12.5-13.6 amps.
Data from Temperature test on our All Purpose Melter:
- Starting Room Temp,. 74°F (23°C)
- Reached, 190°F (88°C) in one hour
- 6 hours later with lid on, temperature was still, 170°F (77°C)

We offer 2 Quart (64 oz) Stainless Steel Pitchers. They work excellent for precise, delicate pours. You have endless possibilities for items such as oils, butters, M&P Soap, wax, creams, lotions, honey, salves, balms, etc. Versatile Melter will hold 6 of our model #AC1095 Stainless Steel Pitchers.

We also offer a more economical 64 oz Aluminum Pitcher. Make sure to place the handles facing outside of the melter for easy access. Melter can hold 7 of our model #PP4lb Aluminum Pitchers.

Need even larger volume containers with easy access? We have some great 6 quart (5.7 liters) Stainless Steel Pots that fit perfectly. Melter will hold 3 of our model #AC1043 Stainless Steel Pots.

Model 6MH

Our cutest Oil/Wax Melter Tank!

Water Jacketed Oil/Wax Tank Model 6MH Comes Complete with...

Benefits:

Specifications:

Accessories & Replacement Parts

Model13MH & 13MH220

Water Jacketed Oil Melter Tank Model 13MH & 13MH220 Comes Complete with...

Specifications for 13 Gallon Oil Melter Tank:

Accessories & Replacement Parts

Benefits:

Model 20MH & 20MH220

Sloped Bottom

Water Jacketed Oil/Wax Melter Tank Model 20MH & 20MH220 Comes Complete with...

Specifications for 20 Gallon Oil Melter Tank:

Benefits:

Tip:

Accessories & Replacement Parts

Model45MH

Oil/Wax Melter Tank Model 45MH Comes Complete with...

Benefits:

Sloped Bottom

Specifications for 45 Gallon Oil Melter Tank:

Model60MH

Oil Warmer / Melter Tank Model 60MH Comes Complete with...

Benefits:

Sloped Bottom

Specifications for 60 Gallon Oil Melter Tank:

Model85MH

Oil/Wax Melter Tank Model 85MH Comes Complete with...

Benefits:

Sloped Bottom

Specifications for 85 Gallon Oil Melter Tank:

Model125MH

Oil Warmer / Melter Tank Model 125MH Comes Complete with...

Benefits:

Sloped Bottom

Specifications for 125 Gallon Oil Mellter Tank:

Model APM7P

Description:

Specifications:

Optional extras: